Linux version 2.6.16-rc2-smp (rddunlap@capvalley) (gcc version 4.1.0 20060109 (prerelease) (SUSE Linux)) #2 SMP Wed Feb 8 10:43:30 PST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f680000 (usable)
 BIOS-e820: 000000001f680000 - 000000001f700000 (ACPI NVS)
 BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
502MB LOWMEM available.
found SMP MP-table at 000f5e70
On node 0 totalpages: 128640
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 124544 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
DMI present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f5de0
ACPI: RSDT (v001 PTLTD  Capell00 0x06040000  LTP 0x00000000) @ 0x1f688a7f
ACPI: FADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f690df3
ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f690e67
ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f690ecf
ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f690f07
ACPI: ASF! (v032   CETP     CETP 0x06040000 PTL  0x00000001) @ 0x1f690f9d
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1f690f75
ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x1f689cb1
ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x1f689615
ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x1f688ac7
ACPI: DSDT (v001 INTEL  CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1 already used, trying 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
More than 8 CPUs detected and CONFIG_X86_PC cannot handle it.
Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda7 vga=0x317 selinux=0 resume=/dev/sda2  console=ttyS0,57600n8 console=tty0 splash=silent debug initcall_debug this=2616rc2lib
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 502080k/514560k available (2228k kernel code, 11904k reserved, 839k data, 200k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xe0000000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Using HPET for gettimeofday
Detected 1833.360 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 3671.01 BogoMIPS (lpj=18355090)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) M CPU        000  @ 1.83GHz stepping 04
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3666.94 BogoMIPS (lpj=18334703)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Pentium(R) M CPU        000  @ 1.83GHz stepping 04
Total of 2 processors activated (7337.95 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=10000
checking if image is initramfs... it is
Freeing initrd memory: 2536k freed
Calling initcall 0xc040a3ad: cpufreq_tsc+0x0/0x63()
Calling initcall 0xc040af3e: acpisleep_dmi_init+0x0/0x11()
Calling initcall 0xc040b0ff: reboot_init+0x0/0x11()
Calling initcall 0xc0410816: helper_init+0x0/0x20()
Calling initcall 0xc0410996: pm_init+0x0/0x25()
Calling initcall 0xc04109fe: pm_disk_init+0x0/0x14()
Calling initcall 0xc0410b7c: ksysfs_init+0x0/0x25()
Calling initcall 0xc0412495: filelock_init+0x0/0x26()
Calling initcall 0xc0412be1: init_aout_binfmt+0x0/0xf()
Calling initcall 0xc0412bf0: init_misc_binfmt+0x0/0x38()
Calling initcall 0xc0412c28: init_script_binfmt+0x0/0xf()
Calling initcall 0xc0412c37: init_elf_binfmt+0x0/0xf()
Calling initcall 0xc04134ff: debugfs_init+0x0/0x42()
Calling initcall 0xc041ed51: sock_init+0x0/0x4c()
Calling initcall 0xc041f73b: netlink_proto_init+0x0/0x14f()
NET: Registered protocol family 16
Calling initcall 0xc0413b8c: kobject_uevent_init+0x0/0x32()
Calling initcall 0xc0413c57: pcibus_class_init+0x0/0xf()
Calling initcall 0xc04142d1: pci_driver_init+0x0/0xf()
Calling initcall 0xc0419323: tty_class_init+0x0/0x25()
Calling initcall 0xc040a05c: mtrr_if_init+0x0/0x5b()
Calling initcall 0xc04143ed: pci_acpi_init+0x0/0x2a()
ACPI: bus type pci registered
Calling initcall 0xc041613a: init_acpi_device_notify+0x0/0x43()
Calling initcall 0xc041de75: pci_pcbios_init+0x0/0x1bc()
PCI: PCI BIOS revision 2.10 entry at 0xfd803, last bus=3
Calling initcall 0xc041e031: pci_mmcfg_init+0x0/0x115()
PCI: Using MMCONFIG
Calling initcall 0xc041e1c8: pci_direct_init+0x0/0x157()
Calling initcall 0xc0409e6d: mtrr_init_finialize+0x0/0x2e()
Calling initcall 0xc040f88b: topology_init+0x0/0x52()
Calling initcall 0xc013955c: pm_sysrq_init+0x0/0x13()
Calling initcall 0xc04122b2: init_bio+0x0/0xe8()
Calling initcall 0xc04139fe: genhd_device_init+0x0/0x2a()
Calling initcall 0xc0414a56: fbmem_init+0x0/0x81()
Calling initcall 0xc0415f61: acpi_init+0x0/0x1d9()
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
Calling initcall 0xc04164cc: acpi_ec_init+0x0/0x5a()
Calling initcall 0xc0416b39: acpi_pci_root_init+0x0/0x26()
Calling initcall 0xc0416b87: acpi_pci_link_init+0x0/0x44()
Calling initcall 0xc0416d08: acpi_power_init+0x0/0x6e()
Calling initcall 0xc0416e9c: acpi_system_init+0x0/0xb9()
Calling initcall 0xc0416f55: acpi_event_init+0x0/0x3c()
Calling initcall 0xc0417562: acpi_scan_init+0x0/0xf0()
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [H_EC] (gpe 23) interrupt mode.
ACPI: Power Resource [FN00] (off)
Calling initcall 0xc0417832: pnp_init+0x0/0x19()
Linux Plug and Play Support v0.97 (c) Adam Belay
Calling initcall 0xc0417a2e: pnpacpi_init+0x0/0x5d()
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
Calling initcall 0xc0417dbc: pnpbios_init+0x0/0x34e()
PnPBIOS: Disabled by ACPI PNP
Calling initcall 0xc041985d: misc_init+0x0/0x79()
Calling initcall 0xc041cf6f: init_scsi+0x0/0xb1()
SCSI subsystem initialized
Calling initcall 0xc041d427: usb_init+0x0/0xcd()
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Calling initcall 0xc041d8ad: input_init+0x0/0x133()
Calling initcall 0xc041db85: i2c_init+0x0/0x2e()
Calling initcall 0xc041e379: pci_acpi_init+0x0/0x98()
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Calling initcall 0xc041e411: pci_legacy_init+0x0/0xe6()
Calling initcall 0xc041e86f: pcibios_irq_init+0x0/0x474()
Calling initcall 0xc041ece3: pcibios_init+0x0/0x6e()
Calling initcall 0xc041edf3: proto_init+0x0/0x31()
Calling initcall 0xc041ee7f: net_dev_init+0x0/0x1b9()
Calling initcall 0xc041f88a: genl_init+0x0/0x8f()
Calling initcall 0xc041242d: init_pipe_fs+0x0/0x45()
Calling initcall 0xc0417652: acpi_motherboard_init+0x0/0x1e0()
Calling initcall 0xc0417907: pnp_system_init+0x0/0xf()
pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
Calling initcall 0xc041927b: chr_dev_init+0x0/0x75()
Calling initcall 0xc041dc4c: cpufreq_gov_performance_init+0x0/0xf()
Calling initcall 0xc041dc5b: pcibios_assign_resources+0x0/0x6c()
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-2fff
  MEM window: d0000000-d01fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Calling initcall 0xc0105c20: time_init_device+0x0/0x1f()
Calling initcall 0xc0408a28: i8259A_init_sysfs+0x0/0x1f()
Calling initcall 0xc0408f61: sbf_init+0x0/0xc1()
Simple Boot Flag at 0x36 set to 0x1
Calling initcall 0xc0409022: i8237A_init_sysfs+0x0/0x1f()
Calling initcall 0xc01099c8: cache_sysfs_init+0x0/0x6e()
Calling initcall 0xc040c834: init_lapic_sysfs+0x0/0x31()
Calling initcall 0xc040e6a7: ioapic_init_sysfs+0x0/0xcf()
Calling initcall 0xc040ff53: create_proc_profile+0x0/0x1c8()
Calling initcall 0xc041028c: ioresources_init+0x0/0x3f()
Calling initcall 0xc04103c6: uid_cache_init+0x0/0x73()
Calling initcall 0xc0410657: param_sysfs_init+0x0/0x145()
Calling initcall 0xc041079c: init_posix_timers+0x0/0x7a()
Calling initcall 0xc0410836: init_posix_cpu_timers+0x0/0x7e()
Calling initcall 0xc04108dc: init+0x0/0x71()
Calling initcall 0xc041094d: proc_dma_init+0x0/0x23()
Calling initcall 0xc0133ecb: percpu_modinit+0x0/0x66()
Calling initcall 0xc0410970: kallsyms_init+0x0/0x26()
Calling initcall 0xc0410a12: ikconfig_init+0x0/0x37()
Calling initcall 0xc0410ab5: audit_init+0x0/0xc7()
audit: initializing netlink socket (disabled)
audit(1139577227.610:1): initialized
Calling initcall 0xc04113a2: init_per_zone_pages_min+0x0/0x4f()
Calling initcall 0xc0411c29: pdflush_init+0x0/0x16()
Calling initcall 0xc0411c64: kswapd_init+0x0/0x57()
Calling initcall 0xc0411d72: init_emergency_pool+0x0/0x54()
Calling initcall 0xc0411dc6: gate_vma_init+0x0/0x39()
Calling initcall 0xc0411e26: procswaps_init+0x0/0x23()
Calling initcall 0xc0411e49: init_tmpfs+0x0/0xba()
Calling initcall 0xc0411f03: cpucache_init+0x0/0x53()
Calling initcall 0xc0412472: fasync_init+0x0/0x23()
Calling initcall 0xc04129ed: aio_setup+0x0/0x56()
Calling initcall 0xc0412a43: inotify_setup+0x0/0xaa()
Calling initcall 0xc0412aed: eventpoll_init+0x0/0xf4()
Calling initcall 0xc0412c46: init_mbcache+0x0/0x18()
Calling initcall 0xc0412c5e: dnotify_init+0x0/0x23()
Calling initcall 0xc0413058: init_devpts_fs+0x0/0x34()
Calling initcall 0xc041308c: init_ext3_fs+0x0/0x63()
Calling initcall 0xc0413182: journal_init+0x0/0xcd()
Calling initcall 0xc041324f: init_ext2_fs+0x0/0x63()
Calling initcall 0xc04132e8: init_ramfs_fs+0x0/0xf()
Calling initcall 0xc0413326: init_fat_fs+0x0/0x49()
Calling initcall 0xc041336f: init_msdos_fs+0x0/0xf()
Calling initcall 0xc041337e: init_vfat_fs+0x0/0xf()
Calling initcall 0xc041338d: init_iso9660_fs+0x0/0x65()
Calling initcall 0xc0413486: init_nls_cp437+0x0/0xf()
Calling initcall 0xc0413495: init_nls_cp850+0x0/0xf()
Calling initcall 0xc04134a4: init_nls_ascii+0x0/0xf()
Calling initcall 0xc04134b3: init_nls_iso8859_1+0x0/0xf()
Calling initcall 0xc04134c2: init_nls_iso8859_15+0x0/0xf()
Calling initcall 0xc04134d1: init_nls_utf8+0x0/0x1f()
Calling initcall 0xc04134f0: init_relayfs_fs+0x0/0xf()
Calling initcall 0xc0413541: configfs_init+0x0/0x4d()
Calling initcall 0xc041358e: ipc_init+0x0/0x16()
Calling initcall 0xc0413753: init_mqueue_fs+0x0/0xe5()
Calling initcall 0xc0413838: init_crypto+0x0/0x16()
Initializing Cryptographic API
Calling initcall 0xc041386f: init+0x0/0xf()
Calling initcall 0xc041387e: init+0x0/0xf()
Calling initcall 0xc041388d: init+0x0/0x38()
Calling initcall 0xc04138c5: init+0x0/0xf()
Calling initcall 0xc0413a28: noop_init+0x0/0xf()
io scheduler noop registered
Calling initcall 0xc0413a37: as_init+0x0/0x4d()
io scheduler anticipatory registered
Calling initcall 0xc0413a84: deadline_init+0x0/0x4d()
io scheduler deadline registered
Calling initcall 0xc0413ad1: cfq_init+0x0/0xbb()
io scheduler cfq registered (default)
Calling initcall 0xc01db8ce: pci_init+0x0/0x2c()
Calling initcall 0xc04142e0: pci_sysfs_init+0x0/0x33()
Calling initcall 0xc0414313: pci_proc_init+0x0/0x63()
Calling initcall 0xc0414376: pcie_portdrv_init+0x0/0x29()
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
Calling initcall 0xc0414712: fb_console_init+0x0/0x5d()
Calling initcall 0xc04150c0: vesafb_init+0x0/0x261()
vesafb: framebuffer at 0xc0000000, mapped to 0xe0080000, using 3072k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Calling initcall 0xc0415499: vga16fb_init+0x0/0x7e()
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
Calling initcall 0xc041617d: acpi_ac_init+0x0/0x56()
ACPI: AC Adapter [ADP1] (on-line)
Calling initcall 0xc04161d3: acpi_battery_init+0x0/0x56()
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Battery Slot [BAT2] (battery absent)
Calling initcall 0xc0416229: acpi_button_init+0x0/0x56()
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
Calling initcall 0xc041688e: acpi_fan_init+0x0/0x56()
ACPI: Fan [FAN0] (off)
Calling initcall 0xc04168e4: acpi_video_init+0x0/0x56()
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Calling initcall 0xc041693a: hotkey_init+0x0/0x1ff()
Using specific hotkey driver
Calling initcall 0xc0416bcb: irqrouter_init_sysfs+0x0/0x35()
Calling initcall 0xc0416d76: acpi_processor_init+0x0/0x97()
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
Calling initcall 0xc0416e0d: acpi_container_init+0x0/0x39()
Calling initcall 0xc0416e46: acpi_thermal_init+0x0/0x56()
ACPI: Thermal Zone [TZ00] (26 C)
ACPI: Thermal Zone [TZ01] (25 C)
Calling initcall 0xc0416fe7: acpi_ibm_init+0x0/0x57b()
ibm_acpi: ec object not found
Calling initcall 0xc0417d2f: pnpbios_thread_init+0x0/0x76()
Calling initcall 0xc0418558: isapnp_init+0x0/0xc42()
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Calling initcall 0xc04192fe: rand_initialize+0x0/0x25()
Calling initcall 0xc0419378: tty_init+0x0/0x18e()
Calling initcall 0xc0419506: pty_init+0x0/0x357()
Calling initcall 0xc0419d9c: lp_init_module+0x0/0x2a1()
request_module: runaway loop modprobe net-pf-1
lp: driver loaded but no devices found
Calling initcall 0xc041a03d: rtc_init+0x0/0x18a()
Real Time Clock Driver v1.12ac
Calling initcall 0xc041a1c7: hpet_init+0x0/0x62()
Calling initcall 0xc041a229: ppdev_init+0x0/0x99()
request_module: runaway loop modprobe net-pf-1
ppdev: user-space parallel port driver
Calling initcall 0xc041a2c2: watchdog_init+0x0/0x9c()
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
Calling initcall 0xc041a35e: agp_init+0x0/0x21()
Linux agpgart interface v0.101 (c) Dave Jones
Calling initcall 0xc041a3e5: agp_intel_init+0x0/0x21()
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
Calling initcall 0xc041a406: drm_core_init+0x0/0x12d()
[drm] Initialized drm 1.0.1 20051102
Calling initcall 0xc041a533: hangcheck_init+0x0/0x72()
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using monotonic_clock().
Calling initcall 0xc041a645: cn_init+0x0/0xbe()
Calling initcall 0xc041a703: cn_proc_init+0x0/0x33()
Calling initcall 0xc041a736: intelfb_init+0x0/0x624()
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM chipsets
intelfb: Version 0.9.2
Calling initcall 0xc041ad5a: serio_init+0x0/0x86()
Calling initcall 0xc041ade0: i8042_init+0x0/0x2e3()
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Calling initcall 0xc041b0c3: serport_init+0x0/0x2a()
Calling initcall 0xc041b0ed: serio_raw_init+0x0/0x13()
Calling initcall 0xc041b3e5: serial8250_init+0x0/0x129()
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Calling initcall 0xc041b5c7: serial8250_pnp_init+0x0/0xf()
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Calling initcall 0xc041b5d6: serial8250_pci_init+0x0/0x11()
ACPI: PCI Interrupt 0000:02:00.3[C] -> GSI 18 (level, low) -> IRQ 193
0000:02:00.3: ttyS1 at I/O 0x2048 (irq = 193) is a 16550A
Calling initcall 0xc041bad6: parport_default_proc_register+0x0/0x18()
Calling initcall 0xc041bbe3: firmware_class_init+0x0/0x62()
Calling initcall 0xc041beba: floppy_init+0x0/0x8a4()
floppy0: no floppy controllers found
Calling initcall 0xc041c7a1: rd_init+0x0/0x19d()
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
Calling initcall 0xc041c959: loop_init+0x0/0x331()
loop: loaded (max 8 devices)
Calling initcall 0xc041cc8a: pkt_init+0x0/0x11f()
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Calling initcall 0xc041cda9: init_cryptoloop+0x0/0x27()
Calling initcall 0xc041cdd0: e1000_init_module+0x0/0x34()
Intel(R) PRO/1000 Network Driver - version 6.3.9-k2
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:02:00.0 to 64
e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:0e:0c:72:b9:3e
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Calling initcall 0xc041ce04: e100_init_module+0x0/0x48()
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Calling initcall 0xc041ce90: net_olddevs_init+0x0/0x99()
Calling initcall 0xc041d1d7: spi_transport_init+0x0/0x2a()
Calling initcall 0xc041d201: ata_init+0x0/0x30()
libata version 1.20 loaded.
Calling initcall 0xc041d231: piix_init+0x0/0x24()
ata_piix 0000:00:1f.2: version 1.05
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3f01 87:4003 88:207f
ata1: dev 0 ATA-7, max UDMA/133, 320173056 sectors: LBA48
ata1: dev 1 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata1: dev 1 ATAPI, max UDMA/33
ata1: dev 0 configured for UDMA/33
ata1: dev 1 configured for UDMA/33
scsi0 : ata_piix
  Vendor: ATA       Model: Maxtor 6Y160M0    Rev: YAR5
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata1(1): WARNING: ATAPI is disabled, device ignored.
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
ATA: abnormal status 0x7F on port 0x177
ata2: disabling port
scsi1 : ata_piix
Calling initcall 0xc041d255: init_sd+0x0/0x79()
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
Calling initcall 0xc041d2ce: init_sr+0x0/0x22()
Calling initcall 0xc041d2f0: init_sg+0x0/0x12b()
sd 0:0:0:0: Attached scsi generic sg0 type 0
Calling initcall 0xc041d41b: cdrom_init+0x0/0xc()
Calling initcall 0xc041d617: mon_init+0x0/0xe2()
Calling initcall 0xc041d6f9: ehci_hcd_pci_init+0x0/0x25()
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 217, io mem 0xd0540000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Calling initcall 0xc041d71e: ohci_hcd_pci_init+0x0/0x36()
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Calling initcall 0xc041d754: uhci_hcd_init+0x0/0xdb()
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 217, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 209, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 193, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 201, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Calling initcall 0xc041d82f: usb_usual_init+0x0/0x1e()
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 3 ports detected
usb 4-2.1: new full speed USB device using uhci_hcd and address 3
usb 4-2.1: configuration #1 chosen from 1 choice
usb 4-2.2: new low speed USB device using uhci_hcd and address 4
usb 4-2.2: configuration #1 chosen from 1 choice
usbcore: registered new driver libusual
Calling initcall 0xc041d85a: hid_init+0x0/0x42()
usbcore: registered new driver hiddev
input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /class/input/input0
input: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1d.2-2.1
input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /class/input/input1
input: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1d.2-2.1
input: Kensington      Kensington USB/PS2 Wheel Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Kensington      Kensington USB/PS2 Wheel Mouse] on usb-0000:00:1d.2-2.2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Calling initcall 0xc041d9e0: mousedev_init+0x0/0xd8()
mice: PS/2 mouse device common for all mice
Calling initcall 0xc041dab8: evdev_init+0x0/0x11()
Calling initcall 0xc041dac9: atkbd_init+0x0/0x13()
Calling initcall 0xc041dadc: psmouse_init+0x0/0x3e()
Calling initcall 0xc041db1a: pcspkr_init+0x0/0x5c()
input: AT Translated Set 2 keyboard as /class/input/input3
input: PC Speaker as /class/input/input4
Calling initcall 0xc041db76: uinput_init+0x0/0xf()
Calling initcall 0xc041dbb3: i2c_dev_init+0x0/0x88()
i2c /dev entries driver
Calling initcall 0xc041dc3b: i2c_i801_init+0x0/0x11()
Calling initcall 0xc041f1f8: flow_cache_init+0x0/0x1b3()
Calling initcall 0xc041f3ab: llc_init+0x0/0x55()
Calling initcall 0xc041f470: llc2_init+0x0/0xb4()
NET: Registered protocol family 26
Calling initcall 0xc041f70f: snap_init+0x0/0x2c()
Calling initcall 0xc0420139: inet_init+0x0/0x2c1()
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 327680 bytes)
TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Calling initcall 0xc0420725: ipip_init+0x0/0x86()
IPv4 over IPv4 tunneling driver
Calling initcall 0xc042081c: ipgre_init+0x0/0x8c()
GRE over IPv4 tunneling driver
Calling initcall 0xc04208a8: init_syncookies+0x0/0x16()
Calling initcall 0xc04208be: ah4_init+0x0/0x5d()
Calling initcall 0xc042091b: esp4_init+0x0/0x5d()
Calling initcall 0xc0420978: ipcomp4_init+0x0/0x5d()
Calling initcall 0xc04209d5: ipip_init+0x0/0x5d()
Calling initcall 0xc0420a32: inet_diag_init+0x0/0x65()
Calling initcall 0xc0420a97: tcp_diag_init+0x0/0xf()
Calling initcall 0xc0420be5: af_unix_init+0x0/0x61()
NET: Registered protocol family 1
Calling initcall 0xc0420c46: packet_init+0x0/0x53()
NET: Registered protocol family 17
Calling initcall 0xc0420c99: ipsec_pfkey_init+0x0/0x8a()
NET: Registered protocol family 15
Calling initcall 0xc0420d23: x25_init+0x0/0x54()
NET: Registered protocol family 9
X.25 for Linux. Version 0.2 for Linux 2.1.15
Calling initcall 0xc0420e24: lapb_init+0x0/0x7()
Calling initcall 0xc040a272: start_lost_tick_compensation+0x0/0x11()
Calling initcall 0xc040cd52: check_nmi_watchdog+0x0/0x150()
Calling initcall 0xc040cc9d: init_lapic_nmi_sysfs+0x0/0x35()
Calling initcall 0xc040eae2: balanced_irq_init+0x0/0x13d()
Starting balanced_irq
Calling initcall 0xc040cfa8: io_apic_bug_finalize+0x0/0x1c()
Calling initcall 0xc040f7ee: print_ipi_mode+0x0/0x26()
Using IPI No-Shortcut mode
Calling initcall 0xc0138669: software_resume+0x0/0xe0()
Calling initcall 0xc020adb8: acpi_poweroff_init+0x0/0x53()
Calling initcall 0xc0415ce8: acpi_wakeup_device_init+0x0/0xc5()
ACPI wakeup devices: 
PWRB HDEF PXS1 PXS2 PXS3 PXS4 PXS5 PXS6 USB1 USB2 USB3 USB4 USB7 SLT0 SLT1 SLT2 SLT3 SLT6 LANC MODM UART 
Calling initcall 0xc0415dce: acpi_sleep_init+0x0/0x9a()
ACPI: (supports S0 S3 S4 S5)
Calling initcall 0xc020b2d4: acpi_sleep_proc_init+0x0/0x8a()
Calling initcall 0xc04192f0: seqgen_init+0x0/0xe()
Calling initcall 0xc041b6dd: early_uart_console_switch+0x0/0x79()
Calling initcall 0xc02d4ae3: net_random_reseed+0x0/0x38()
Freeing unused kernel memory: 200k freed
Write protecting the kernel read-only data: 413k
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3911816k swap on /dev/sda2.  Priority:-1 extents:1 across:3911816k
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No new microcode data for CPU0
microcode: No new microcode data for CPU1
IA-32 Microcode Update Driver v1.14 unregistered